View DSTINIS400_1234889.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DSTINIS400/DSTINIs-00x Sockets Evaluation Board
www.maxim-ic.com
GENERAL DESCRIPTION
The TINI sockets boards are motherboards designed to host the corresponding TINI evaluation module. The combination of the two boards allows full evaluation of the features of the target microprocessor. To evaluate the DS80C400, order both a DSTINIm400 and a DSTINIS400. Although various boards support different evaluation modules, the most popular is the DSTINIS400. It includes a 144-pin SODIMM connector and provides (R) 1-Wire , CAN2.0B, serial, and a 10/100 Ethernet PHY for connecting the TINIm400 to the physical world. The DSTINIm400 and DSTINIS400 are fully assembled and tested circuit boards. When used together they form a complete evaluation system for the DS80C400 network microcontroller. The DSTINIm400 module includes the DS80C400 network microcontroller, a real-time clock, 1MB flash, 1MB static RAM, and support for an external Ethernet PHY for connecting to a wide variety of networks. The circuit board is designed as a module to be plugged into the 144-pin SODIMM connector on the DSTINIS400. Detailed information about the initial setup process and use of the TINI platform is contained in Application Note 612: Getting Started with the TINIm400 (DS80C400) Verification Module.
TINI and 1-Wire are registered trademarks of Dallas Semiconductor.
(R)
FEATURES

Hosts the TINI Runtime Environment in Validated Hardware Design (in Conjunction with the DSTINIm400) 10/100 Base-T Ethernet Port Two Serial Ports Dual 1-Wire Network Ports CAN2.0B Port 5.0V Single-Supply Operation (DSTINIm400) Fully Assembled and Tested Design
ORDERING INFORMATION
PART DSTINIS400 DSTINIs-005 DSTINIs-006 INPUT VOLTAGE* 5V DC regulated 5V DC regulated 9V to 18V DC USED WITH MODULE DSTINIm400 DSTINI1-1MG, DSTINI1-512 DSTINI1-1MG, DSTINI1-512 DIMENSIONS 12cm x 10cm 16cm x 10cm 16cm x 10cm
*The user must supply an external power supply.
COMPONENT LIST
DESIGNATION C1 C2, C4-C6 C3, C7, C9, C13, C15, C26, C28, C30, C38 C12, C14, C17, C19, C25, C27, C29, C33, C37 C8 C10, C31, C32, C34-C36 C11 QTY 1 4 9 DESCRIPTION 47pFcapacitor (1206) 47mF capacitors (1206) 100nF capacitors (1206)
9 1 6 1
10nF capacitors (1206) 220nF capacitor (1206) 1.0mF capacitors (1206) 4.7mF capacitor (1206)
1 of 11
REV: 110603
DSTINIS400/DSTINIs-00x Sockets Evaluation Board
COMPONENT LIST (continued)
DESIGNATION C16, C18 C20-C22 C23, C24 D1 D2 J1 J2 J7 J9-J11 J12 J13 J14 J16 L1 R1 R2 R4-R7, R8, R10-R12 R13, R9 R14 R15, R17, R18 R16 R19 QTY 2 3 2 1 1 1 1 1 3 1 1 1 1 1 1 1 8 2 1 3 1 1 DESCRIPTION 270pF capacitor (1206) 1nF, 2kV thru-hole capacitors 27pF capacitors (1206) 1N5908 D0-201 BAT54 SOT-23 SODIMM144 Hirose SX6E-144S-0.8SH 2.5mm center, 5.5mm outside barrel connector RJ-45 modular jack 3 x 1-pin headers, 0.1 centers DB9 serial female DB9 serial male Pad jumper RJ11 modular jack 22mH inductor 205kW, 1% resistor (1206) 121kW, 1% resistor (1206) 49.9W, 1% resistors (1206) 47W resistor (1206) 22.1kW, 1% resistor (1206) 220W resistors (1206) 10kW resistor (1206) Pad jumper DESIGNATION R20 R21 R22, R23 R24 QTY 1 1 2 1 DESCRIPTION 47kW resistor (1206) 124W, 1% resistor (1206) 1kW resistor (1206)
10kW resistor (1206) BelFuse S558-5999-T7 T1 1 transformer MAX1692 PWM step-down U1 1 regulator Intel LXT972ALC Ethernet U3 1 PHY U4-U6 3 Dialight 597-7741 LED U7 1 MAX560CAI transceiver DS2480B serial 1-Wire line U8 1 driver DS9502 ESD protection U9 1 diode Y1 1 25.000MHz, HC49 Ferrite Bead, Fair-Rite Z1-Z3 3 2512067007Y3 UNPOPULATED COMPONENTS (R) J15 1 DS9094F iButton Clip J18, J28-J30 1 Not used MAX1792EUA18 linear U2 1 regulator DS2408 1-Wire 8-channel U10 1 addressable switch U12 1 Not used
JUMPERS (DSTINIS400)
Network Boot Jumper (J3)
JUMPER 1-2 CONFIGURATION DS80C400 attempts to boot through Ethernet using DHCP and TFTP
10/100Mb Ethernet Jumper (J10)
JUMPER 1-2 2-3 CONFIGURATION 100Mb Ethernet operation. 10Mb Ethernet operation.
Quiet Boot Jumper (J5)
JUMPER 1-2 CONFIGURATION DS80C400 boots without sending loader information to serial port.
Full Duplex Jumper (J11)
JUMPER 1-2 2-3 CONFIGURATION Ethernet is configured for full-duplex operation. Ethernet is configured for half-duplex operation.
Auto Negotiation Jumper (J9)
JUMPER 1-2 2-3 CONFIGURATION Auto-negotiation disabled. Auto-negotiation enabled.
DTR Reset Jumper (J11)
JUMPER 1-2 CONFIGURATION DTR reset is used for communication with the DS80C400 loader application.
iButton is a registered trademark of Dallas Semiconductor.
2 of 11
DSTINIS400/DSTINIs-00x Sockets Evaluation Board
PIN HEADERS
CONNNECTOR J18 J20 J21 J27 J28 J29 J30 DESCRIPTION Recreated I/O Port. Latched from 1-Wire bus. Requires installation of DS2408. See schematic. CAN Bus. See schematic for pinout. SPITM Bus. See schematic for pinout. Alternately provides connection to P5.4-P5.7 2 I CTM Bus. See schematic for pinout. Alternately provides connection to P1.0 and P1.1. Unused. No user-accessible pins available. Unused. No user-accessible pins available. Unused. No user-accessible pins available.
QUICK START
Recommended Equipment
The sockets board requires an external power supply and cables as needed to access the desired features of the board. The 5V DC power supply is mandatory, but the other cables are required only if that feature is to be used. The specific example shown here is for a TINIm400/TINIs400 system. Hardware: 5V DC Power Supply Input Voltage: per customer requirements Output Voltage: 5V DC 10% Output Current: >150mA Polarization: Positive Center Output Plug Type: 2.5mm I.D. x 5.5mm O.D. x 12mm Female (P-6) Example: Digi-Key (www.digikey.com) part number T309-P6P-ND (110V input), 5V DC power Ethernet Cable: Note: There are two types of Ethernet cable. For connection to a router or hub, use a standard "straight-through" Ethernet cable. For direct connection to an Ethernet port on the back of a PC, use a "crossover" Ethernet cable. A crossover cable is specially made for two-computer networking. These cables can be purchased from almost any computer or electronics store. Example (straight-through): Radio Shack (www.radioshack.com) Cat 5E (3ft) Network Cable, part number 2781763 Example (crossover): Radio Shack Cat 5E (3m) Crossover Cable, part number 278-2011 RS-232C Serial Cable (DB9 Male to DB9 Female): This cable is straight-through, not a null-modem (crossover). These cables can be purchased from any computer or electronics store.
SPI is a trademark of Motorola, Inc. I2C is a trademark of Philips Corp. Purchase of I2C components of Maxim Integrated Products, Inc., or one of its sublicensed Associated Companies, conveys a license under the Philips I2C Patent Rights to use these components in an I2C system, provided that the system conforms to the I2C Standard Specification as defined by Philips.
3 of 11
DSTINIm400/DSTINIs-00x Sockets Evaluation Board
MORE INFORMATION
TINI platform details can be found at www.maxim-ic.com/TINI. The TINI Specification and Developer's Guide (Addison-Welsey, 2001) is an invaluable resource when developing with the TINI platform. Download a free copy from our website at www.maxim-ic.com/TINIguide.
Additional Resources
For detailed information about the initial setup and use of the TINI platform, refer to Application Note 612: Getting Started with the TINIm400 (DS80C400) Verification Module at www.maxim-ic.com/appnoteindex. DS80C400 network microcontroller data sheet: www.maxim-ic.com/DS80C400 Microcontroller Website: www.maxim-ic.com/microcontrollers
4 of 11
V33 VCC3
M D IO
T x D [3:0]
TxEn
n R s t O ut
P 6[7:6]
P 5[3:0]
P 3[3:0]
P 1[7:0]
MDC
CRS
C OL
R x D [3:0]
RxDV
R x C lk
n R stIn
RxEr
TxClk
GND1 GND2 VCC3 VCC4 A13 nRstIn A16 nRam2En A15 A8 A14 A9 A17 A11 A20 nPSEN A19 A10 D6 D7 D5 D3 D4 nFlashEn D2 A0 D1 A4 D0 P1.4 A3 P1.5 A2 nRam1En A1 P1.3 A12 P1.2 P1.6 P1.1 P1.7 P1.0 nRstOut nEA CRS TxEn COL RxEr RxDV MDC MDIO GND52 GND53 TxD.3 TxD.2 TxD.1 TxD.0 GND58 GND59 TxClk RxClk GND62 GND63 RxD.0 RxD.1 RxD.2 RxD.3 GND68 GND69 NC70 P3.0 ALE P3.1 P5.3 P3.2 nPCE1 NC77 nPCE3 P3.3 nPCE0 NC81 nPCE2 nWr NC84 nRd NC86 P5.2 NC88 NC89 NC90 NC91 NC92 NC93 NC94 P5.1 P5.0 A18 nCE3 nCE2 nCE1 nCE0 P6.7 P6.6 A21 nCE7 nCE6 nCE5 nCE4 A5 NC109 A6 NC112 A7 NC114 NC115 Local1W NC117 vPullup NC119 NC120 NC121 NC122 NC123 NC124 NC125 NC126 NC127 NC128 NC129 NC130 NC131 NC132 NC133 NC134 NC135 NC136 NC137 NC138 NC139 NC140 VCC141 VCC142 GND143 GND144
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144
n R stIn A16 n P S En A17 A20 A19 D6 D7 D5 D3 D4 D2 A0 P14 A3 A2 A1 P13 P12 P16 P11 P17 P10 n R s t O ut CRS TxEn C OL RxEr R xDV MDC M D IO TxD3 TxD2 TxD1 TxD0 TxClk R x C lk R xD0 R xD1 R xD2 R xD3 P15 D1 D0 D [7:0]
J1 DIMM144
P30 P31 P53 P32 nPCE1 nPCE3 P33 nPCE0 nPCE2
P52
P51 P50 A18 nC E2 nC E1 nC E0 P67 P66 A21 nC E7 nC E6 nC E5 nC E4 nC E3
Size B T I N I m 4 0 0 S o c k e t B o a r d : T I N I M o d u l e Connector Do cument Number TINIs400 Rev B
T itle
Date: M o n d a y , M a r c h 0 4 , 2 002 1 7
Copyright (C) 2003 Dallas Semiconductor / Maxim
ALE nWr nRd
n PCE[3:0]
V50 Local1W n C E [7:3]
V CC5
V50 V33 U1 1 IN SHDN SYNC/PWM REF PGND GND LIM BP 2 FB 5 R2 121K 1% LX 9 22 uH 8 C3 + C2 47uF 7 4 R1 47 pF 205K 1% + C4 47uF + C5 47uF + C6 47uF C7 0.1 uF C1 Bead L1 Z1 V CC3
! J2 1 2 3 87-72010-004 1N5908 D1 C8 0.22 uF 6 0.1 uF
10
3
MAX1692 C9 0.1 uF
V33 U2 C 10 1 .0uF 1 2 3 4 IN1 IN2 RST SHDN OUT1 OUT2 SET GND 8 7 6 5 V18 C 11 4 .7uF VCC3 " J4 P32 nExtInt 1 2 3 3Pin VCC3 Q1 P17 1 2 2Pin J5 P53 1 2 2Pin J3
MAX1792 E U A 1 8
P52
J6 BSS84 R3 10 K 3 2 1 3Pin
Copyright (C) 2003 Dallas Semiconductor / Maxim
Title T I N I m 4 0 0 S o c k e t B o a r d : P o wer and Internals Size A D ate: Docume nt Number TINIs400 M o n d a y , M a r c h 0 4, 2002 2 7 Rev B
Z2 C 12 0.01 uF C 13 0.1 uF VCC3 Z3 BEAD C 14 0.01 uF
BEAD
#$ ##% &
% J7 1 2 3 4 5 6 7 8 R J -45
C 15 0.1 uF
VCCIO1 VCCIO2
VCCA1 VCCA2
VCCD
C 16 270 pF R8 TPIP TPIN 23 24 C 18 270 pF R 10
R4 4 9 .9 1% 49.9 1% 0.01 uF C 17 T1 16 15 49.9 1% 14 11 10 9 1 2 3 6 7 8 C 20 C 21
R5 4 9 .9 1%
R6 4 9 .9 1%
R7 4 9.9 1%
8 40
51
TxEn TxClk T x D [ 3 :0]
R9 TxD3 TxD2 TxD1 TxD0
47
56 55 54 60 59 58 57 49 52 53 45 46 47 48 43 42 62 63 3 64 4 39 5 6 12
TX_EN TX_CLK TX_ER TXD3 TXD2 TXD1 TXD0 RX_DV RX_CLK RX_ER RXD3 RXD2 RXD1 RXD0 MDC MDIO COL CRS MDDIS MDINT RESET PWRDWN SLEW0 SLEW1 ADDR0
21 22
R 11 49.9 1%
R 12 49.9 1% 0.001 uF, 2 kV C 22 1 J8 Pad
U3 LXT972A L C
TPOP TPON LED_CFG1 LED_CFG2 LED_CFG3 RBIAS
19 20 38 37 36 R 14 17 22.1 K 1 %
RxDV RxClk RxEr
R 1 3 47 Rx D3 Rx D2 Rx D1 Rx D0
S558 _ 5 9 9 9 _ T 7 C 19 0.01 uF
0.001 uF, 2 kV
0.001 uF, 2 kV
RxD[3: 0] MDC M DIO COL CRS nRstOut R 16 VCC3 10 K
U4 R 15 220 1 4 597-7741 U5 R 17 2 3
VCC3 1 2 3
J9 &'
PAUSE TDI TDO TMS TCK TRST XI XO TEST0 TEST1
33 27 28 29 30 31 1 2
3 Pin VCC3 2 3 597-7741 25.000 M H z C 23 27 pF C 24 27 pF R 18 220 1 4 597-7741 U6 2 3 VCC3 1 2 3 3 Pin J11 &' 1 2 3 3 Pin J10 &'
Y1 220
1 4
7 11 13 14 15 16 18 32 25 26 41 50 61 VCC3
GND1 GND2 GND3 GND4 GND5 GND6 GND7 GND8 GND9 GND10 GND11 GND12 GND13
34 35
C 25 0.01 uF
C 26 0.1 uF
C 27 0.01 uF
C 28 0.1 uF
C 29 0.01 uF
C 30 0.1 uF R 19
Copyright (C) 2003 Dallas Semiconductor / Maxim
Title T I N I m 4 0 0 S o c k e t B o a r d : E t h ernet Size A D ate: Docume nt Number TINIs400 M o n d a y , M a r c h 0 4, 2002 3 7 Rev B
0 Ohm
J12 TX0_232 RX0_232 D T R 0 _ 2 32 C 31 1 uF 16 C 33 0.01uF 1 2 3 4 5 6 7 8 9
nShDn
VCC3
#
C 34 1 uF +
C 32 1 uF +
D B 9 F E M A L E (DCE)
C 35 1 uF +
+
12
14
13
11
24 25
C1-
15
C1+
P31 P15 P16 P67 P30
TX0 DTR4 RTS4 TX4 RX0 DTR0
7 6 20 21 8 5 26 22 19
EN SHDN
VCC
C2+
C2T1OUT T2OUT 2 3 1 28 9 4 27 23 18 D CD4_232 TX4_232 R 20 47K CTS4_232 1 2 3 4 5 6 7 8 9 RX4_232 J13 D T R 4 _ 2 32 RTS4_232 T3OUT T4OUT R1IN R2IN R3IN R4IN R5IN
T1IN T2IN T3IN T4IN R1OUT R2OUT R3OUT R4OUT R5OUT GND V17 U7 MAX560CAI
P66 P33 P14
RX4 CTS4 DC D4
V+
10
D B 9 M A L E ( D T E)
J14 PAD JUMPER
+ C 36 1 uF n R s tIn
Copyright (C) 2003 Dallas Semiconductor / Maxim
Title T I N I m 4 0 0 S o c k e t B o a r d : I n t e r n a l S e r i a l Ports 0 and 4 Size A D ate: Docume nt Number TINIs400 M o n d a y , M a r c h 0 4, 2002 4 7 Rev B
J15
%
DS9094F Local1 W VCC5 D2 C 37 4 U8 0.01 uF 6 P13 P12 TX1 RX1 7 8 POL TXD RXD GND BAT54 C 38 0.1 uF VPP OWIO NC 5 2 3 XOWIO 1 3 2 C1 NC1 A1 DS9502 VCC5 " Pad Jumper 3 U 10 J18 1 2 3 4 5 6 7 8 9 10 11 11x1 % U9 C2 NC2 A2 6 4 5 RJ11 1 2 3 4 5 6 VCC5 J16
J17 n E x t I nt
DS2480B
1
VDD
4
VCC
OWIO
+
C 39 47uF 1 15 16 NC1 NC15 NC16 GND
P0 P1 P2 P3 P4 P5 P6 P7 STRB
2 14 13 12 11 9 8 7 10
($
&
DS2408
5
Copyright (C) 2003 Dallas Semiconductor / Maxim
Title TINIm400 Socket Board: External 1-Wire Interface and DS2408 Size A D ate: Docume nt Number TINIs400 M o n d a y , M a r c h 0 4, 2002 5 7 Rev B
J19 VCC3 C 40 0.1 uF R 21 3 U 11 C0TX C0RX 124 CANH CANL GND RS 7 6 8 VCC5 SN65HVD230 1 2 3 4 5 6 7 8 9 10 5x2 J20
P50 P51
1 4 5
TXD RXD VREF
V50 VCC5 n P CE[3:0] nPCE0 nPCE1 nPCE2 nPCE3 1 3 5 7 J21 4x2 2 4 6 8
V33 VCC3 J22 J23 VCC3 J24 J25 VCC5
J26 nShDn Pad Jumper R 24 V33 10K P11 SC LK 3 D3 1 BAT54 S VCC5 2 1 BAT54 S D4 3 VCC5 2 P10 SDA 1 2 3 4 4 H E A D E R PINS, 0.1" R 22 1K R 23 1K VCC5 J27
2
VCC
Copyright (C) 2003 Dallas Semiconductor / Maxim
Title TINIm 400 Socket Board: Other I/O Size A D ate: Docume nt Number TINIs400 M o n d a y , M a r c h 0 4, 2002 6 7 Rev B
V33 C 41 100nF C 42 100nF C 43 UIO32 XIO15 XIO14 UIO31 XIO13 UIO30 UIO29 UIO28 UIO27 TDO XIO9 UIO26 XIO8 UIO25 UIO24 UIO23 UIO22 XIO12 XIO11 XIO10 100nF
V18
One 100 nF ceramic capacitor for each U12 V18 connection
C 44 100nF
C 45 100nF U IO0 U IO1 U IO2 U IO3 U IO4 U IO5 U IO6 U IO7 U IO8 U IO9 UIO10 UIO11 UIO12 UIO13 UIO14 UIO15 UIO16 UIO17 UIO18 UIO19 UIO20 UIO21 UIO22 UIO23 UIO24 UIO25 UIO26 UIO27 UIO28 UIO29 UIO30 UIO31 UIO32 C 52 10nF 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 J28
C 46 100nF
C 47 100nF
C 48 100nF
nRstOut
nPSEn nRd D [ 7 :0] U IO0 U IO1 D7 D6 D5 D4 D3 D2 D1 D0 nCE7 nCE6 nCE5 nCE4 nCE3 V33 ALE C 49 10nF J29 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 XIO0 XIO1 XIO2 XIO3 XIO4 XIO5 XIO6 XIO7 XIO8 XIO9 XIO10 XIO11 XIO12 XIO13 XIO14 XIO15 U IO2 U IO3
nWr
n C E [ 7 :3]
26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50
V18a IO27 IO28 IO29 IO30 GND1 IO32 IO33 IO34 IO35 IO36 IO37 VIO1 IO39 IO40 IO41 IO42 IO43 IO44 TDI IO46 TMS TCK IO49 IO50
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
GND6 IO99 VIO4 IO97 IO96 IO95 IO94 IO93 IO92 IO91 IO90 IO89 VIO3 IO87 IO86 IO85 GND5 TDO IO82 IO81 IO80 IO79 IO78 IO77 IO76
One 100 nF ceramic capacitor for each U12 V33 connection
100 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 78 77 76
IO1 IO2 IO3 IO4 VAUX IO6 IO7 IO8 IO9 IO10 IO11 IO12 IO13 IO14 IO15 IO16 IO17 IO18 IO19 Vxx GND21 IO22 IO23 IO24 GND
U 12 XC2C64-7VQ100C
GND4 IO74 IO73 IO72 IO71 IO70 GND3 IO68 IO67 IO66 IO65 IO64 IO63 GND2 IO61 IO60 IO59 IO58 V18b IO56 IO55 IO54 IO53 IO52 VIO2
75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51
UIO21 XIO7 UIO20 UIO19 UIO18 UIO17 UIO16 XIO6 XIO5 UIO15 XIO4 UIO14 UIO13 XIO3 UIO12 V18 UIO11 UIO10 XIO2 U IO9 U IO8 V33
V18 U IO4 A3 A2 A1 A0 C 53 10nF C 54 10nF A [ 3 :0] A [ 2 1 : 1 6] One 10 nF ceramic capacitor for each U12 V18 connection V33 n E x t I nt P53 P17 TDO
U IO7 U IO6
C 50 10nF J30
C 51 10nF
40 Pin dual 1 3 5 7 2 4 6 8 One 10 nF ceramic capacitor for each U12 V33 connection C 55 10nF C 56 10nF C 57 10nF
U IO5 XIO0
XIO1
A21 A20 A19 A18 A17
A16
8Pin
Copyright (C) 2003 Dallas Semiconductor / Maxim
Title P r o g r a m m a b l e I/O Size A D ate: Docume nt Number DSTINIS400 M o n d a y , M a r c h 0 4, 2002 7 7 Rev B
20 Pin dual

▲Up To Search▲

Price & Availability of DSTINIS400

	To Download DSTINIS400 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .